The flexible copper braided connectors are made of flexible copper braids with solderless pressed lugs at each side as contact areas. Normally the connectors of smaller cross sectional area adopts this connecting type. And please refer to Page (待定) Part (待定) for more lug type information.
The flexible copper braids consist of Cu-ETP wires which are braided according to standard GB/T6313.2-1992.
Material: annealed Cu-ETP wires, C11000, copper content ≥ 99.95%
Finish: bare, tin plating, nickel plating, silver plating
Single Wire Diameter:
0.05mm (AWG 44)
Cross Sectional Area: 1.5mm2 - 500mm2
When you place an order, please specify:
| Part No. | Cross Section (mm2) | W Approx. (mm) | L (mm) | d (mm) |
| BGTZ(X)-1.5/L/d/SC | 1.5 | 4.0 | According to your request | According to your request |
| BGTZ(X)-2/L/d/SC | 2 | 5.0 | ||
| BGTZ(X)-2.5/L/d/SC | 2.5 | 6.0 | ||
| BGTZ(X)-4/L/d/SC | 4 | 7.0 | ||
| BGTZ(X)-6/L/d/SC | 6 | 10.0 | ||
| BGTZ(X)-8/L/d/SC | 8 | 12.0 | ||
| BGTZ(X)-10/L/d/SC | 10 | 15.0 | ||
| BGTZ(X)-12/L/d/SC | 12 | 20.0 | ||
| BGTZ(X)-14/L/d/SC | 14 | 20.0 | ||
| BGTZ(X)-16/L/d/SC | 16 | 22.0 | ||
| BGTZ(X)-20/L/d/SC | 20 | 20.0 | ||
| 25.0 | ||||
| BGTZ(X)-25/L/d/SC | 25 | 22.0 | ||
| 30.0 | ||||
| BGTZ(X)-35/L/d/SC | 35 | 23.0 | ||
| 38.0 | ||||
| BGTZ(X)-50/L/d/SC | 50 | 23.0 | ||
| 32.0 | ||||
| 50.0 | ||||
| BGTZ(X)-70/L/d/SC | 70 | 32.0 | ||
| 40.0 | ||||
| 41.0 | ||||
| BGTZ(X)-95/L/d/SC | 95 | 34.0 | ||
| BGTZ(X)-100/L/d/SC | 100 | 33.0 | ||
| 40.0 | ||||
| 51.0 | ||||
| BGTZ(X)-120/L/d/SC | 120 | 34.0 | ||
| BGTZ(X)-150/L/d/SC | 150 | 35.0 | ||
| 42.0 | ||||
| 52.0 | ||||
| BGTZ(X)-185/L/d/SC | 185 | 36.0 | ||
| 53.0 | ||||
| BGTZ(X)-200/L/d/SC | 200 | 37.0 | ||
| 53.0 | ||||
| 93.0 | ||||
| BGTZ(X)-250/L/d/SC | 250 | 39.0 | ||
| 54.0 | ||||
| BGTZ(X)-300/L/d/SC | 300 | 41.0 | ||
| 55.0 | ||||
| 94.0 | ||||
| BGTZ(X)-400/L/d/SC | 400 | 45.0 | ||
| 57.0 | ||||
| 95.0 | ||||
| BGTZ(X)-500/L/d/SC | 500 | 49.0 | ||
| 59.0 | ||||
| 96.0 |
